Eight Tips Help to Extend the Service Life of Sand Maker from kuangshanposui's blog

As a man, being alive is the premise of creating value. Likewise, as for the sand making machine , being able to working in a normal state is the premise of creating value. Only by extending the service life of sand maker machine as long as possible can it be able to create more value. The question is how to make it work for a longer time? Then Machinery will help you with this.At present, the topic of prolonging the service life of the sand maker concerns every mining machinery manufacturing company. There are eight tips that can help to prolong the service life of sand maker.

Before starting sand maker, the workers should check the whirling motion chamber observe door is tightly closed in order to prevent the materials from bursting out of the door. (2) Check the rotation direction of the impeller from the direction of the material feeding mouth of the sand maker. The impeller should rotate at the counter-clockwise direction; otherwise the workers should adjust the wiring connection of the motor. (3) The starting order of the sand maker and the conveying equipment is: materials discharging →sand maker →materials feeding; the crusher should be started without any materials in it and it can be fed into materials after normal operation. The stopping order is opposite to the starting order.

The materials feeding granularity of sand maker should strictly conform to the stipulation, and the materials whose granularity is bigger than the stipulated one are forbidden to be sent in to the crusher, or they will lead to imbalance and over-abrasion of the impeller and even block the impeller passageway and the central material feeding pipe and then the crusher will not be able to work normally. For this reason, if some materials with too large granularity go into the crushing chamber, they should be removed out of the crushing chamber immediately. If the material discharging device of sand maker stops working, then the workers should immediately stop feeding materials; otherwise the impeller will be damaged and the electric motor might be burned.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment


By kuangshanposui
Added Apr 8



Your rate:
Total: (0 rates)